PLEASE NOTE: There will be additional shipping costs for the 32oz size bottle for this item which will be calculated upon receipt of your order. Within North America, the additional shipping will be approximately $10-$15 depending upon your shipping address. Your final order total will be emailed to you for your approval prior to shipping.
Bacteria grows in the most inconvenient places… our cutting boards, kitchen counters, bathrooms and floors. In the past the only option was to use bleach or harsh chemicals. Now you can use PURE for all your sanitizing needs. PURE can be used for most common applications in your home. Where ever you feel you need a spray, spray with PURE. PURE is scent-free. This is an award winning product with its formulation recognized as being designed for the environment.
APPLICATIONS BASED ON 5:1 DILUTION RATE (RTU)
To make the Ready to Use (RTU) solution, for every ounce of concentrate mix with 5 ounces of water.
General All Purpose Cleaner
Fill a spray bottle with 5:1 RTU and use in areas where you would normally use an all purpose cleaner/bacteria remover (ie. cutting boards, counters, etc).
For tougher jobs, allow cleaner to dwell for a couple minutes before wiping.
Mix 2 oz of RTU with one gallon of water.
For hard floors (hardwood, ceramic, tile, etc) rinse and wring out the damp/wet mop head in the floor cleaner solution and mop as usual.
For soft floors (cork, laminate, bamboo, etc) rinse and wring out the Pergo mop head and mop as usual. Alternately, for soft floors you can put the solution in a spray bottle and spray and mop as you go.
For tougher jobs, scrub to agitate and then allow cleaner to dwell for a couple of minutes before mopping.
·If you notice streaking on the floor, reduce the amount of RTU solution per gallon of water.
Use approximately 1 to 1-1/2 oz of RTU
Place the soap in the soap dispenser as you normally would.
·For best results, rinse dishes before loading the dishwasher. If you notice spots on the dishes, you will need to reduce the amount of soap.
Use the chart below to determined the amount of laundry soap per load.
SMALL LOADS or
2 to 3 ounces RTU
MEDIUM LOADS or
3 to 4 ounces RTU
LARGE LOADS or
4 to 6 ounces RTU
If laundry is especially greasy or soiled, allow to soak at least 30 minutes or overnight if necessary. Use the pre-soak feature on your washing machine or fill as usual and allow agitating for 2 minutes. Stop the wash cycle by opening the lid or pulling up on the dial for the desired amount of soaking time and then resume washing as usual. Blue Wonder™ 100% Natural Laundry Soap cleans just as powerfully in cold water as in hot water. Since hot water breaks down fabric and dyes, you can launder in cold water to promote fabric longevity. As a result, your clothes will look better and last longer.
NOTE: Local water quality varies by municipality and regions. “Hard” water (high in minerals)will require more Blue Wonder™ 100% Natural Laundry Soap than “soft” water. Minerals in hard water also cause dull, dingy/discolored whites. For brighter whites, consider investing in a water softener or use food grade hydrogen peroxide.
Blue Wonder™ 100% Natural Laundry Soap activates previously bleached clothing. Do not use chlorine bleach with Blue Wonder™ 100% Natural Laundry Soap. Food grade hydrogen peroxide works well with Blue Wonder™ Natural Laundry Soap for a whitening effect.
Fruit and Vegetable Wash
The Fruit & Veggie Wash can be used on all fruits and vegetables including tomato, lettuce, spinach, apples, strawberries, and more.
Mix ½ teaspoon of RTU into a bowl or sink of water enough to cover fruits and vegetables.
Let soak for 5 to 10 minutes. Rinse, dry and eat or store.
For stainless steel, chrome, nickel, etc, the dilution rate is 2oz of RTU to one gallon of water.
Spray and wipe.